Bitmain Antminer L9 Litecoin Mining Profitability — 2026 Simulation

Live-data simulation of mining Litecoin with the Bitmain Antminer L9 at current network difficulty and Litecoin price.

16 GH/s Hashrate 3,360 W Power Scrypt Algorithm ASIC 210 J/GH Efficiency Live data

Daily Results at $0.07/kWh

Based on Litecoin price: $44.00 — Network hashrate — Live data from our API

Daily Revenue
$1.95
0.044308 LTC
Daily Electricity
$-5.64
3,360 W × 24 h × $0.07
Daily Profit
$-3.70
Unprofitable
Monthly Profit
$-110.86
30-day estimate
$0.024/kWh
Break-even electricity rate
$127.40
Break-even LTC price at $0.07/kWh
$-1,348.77
Projected annual profit (constant prices)

Profitability Analysis

The Bitmain Antminer L9 requires very cheap electricity (below $0.024/kWh) to mine Litecoin profitably at current prices. It remains viable only in the lowest-cost regions globally — such as large-scale hydro-power facilities or co-located industrial mining operations.

As a dedicated ASIC, the Bitmain Antminer L9 is permanently optimised for Scrypt — the algorithm used by Litecoin and Dogecoin. It cannot be repurposed for other algorithms, so its long-term viability is directly tied to the economics of those specific coins.

Profitability at Key Electricity Rates

All figures assume constant Litecoin price ($44.00) and current network difficulty. Actual results will vary as both change over time.

Electricity Rate Daily Revenue Daily Elec. Cost Daily Profit Monthly Profit Status
$0.04/kWh $1.95 $3.23 $-1.28 $-38.28 Break-Even
$0.06/kWh $1.95 $4.84 $-2.89 $-86.67 Break-Even
$0.08/kWh $1.95 $6.45 $-4.50 $-135.05 Unprofitable
$0.10/kWh $1.95 $8.06 $-6.11 $-183.43 Unprofitable
$0.12/kWh $1.95 $9.68 $-7.73 $-231.82 Unprofitable

Bitmain Antminer L9 — Key Specifications

ManufacturerBitmain
CategoryASIC
AlgorithmScrypt
Hashrate16 GH/s
Power Draw3,360 W
Efficiency210 J/GH
Noise75 dB(A)
Approx. Price$3,800
Supported CoinsLTC, DOGE
Release2024-Q1

→ Full Bitmain Antminer L9 review, pros & cons, and buying guide

How to Mine Litecoin with the Bitmain Antminer L9

  1. Acquire and receive the Bitmain Antminer L9

    Purchase the Bitmain Antminer L9 from an authorised reseller or reputable secondary market. Budget approximately $3,800. Verify the unit is complete and inspect for physical damage before powering on. The unit ships ready to mine — no assembly required beyond power and network connections.

  2. Connect power and network

    Connect the Bitmain Antminer L9 to a dedicated 3360W power supply on a 16 A+ circuit at 220–240 V. Connect an Ethernet cable to your router. Power on the unit and wait 2–3 minutes for it to boot.

  3. Configure your Litecoin mining pool

    Access the miner's web interface by entering its IP address in your browser (find it via your router's DHCP lease list). Navigate to Miner Configuration and enter your chosen pool stratum URL, your Litecoin wallet address as the worker username, and 'x' as the password. Recommended pools: LitecoinPool.org, ViaBTC, F2Pool.

  4. Monitor performance and optimise

    After starting, confirm your hashrate matches the expected 16 GH/s in the pool dashboard (allow 10–15 minutes for the pool to register your worker). Use our live Litecoin calculator to track daily earnings against your electricity cost. Consider enabling auto-tune mode or third-party firmware (BOS+ for Antminer units) to improve efficiency 5–10%.

Recommended Litecoin Mining Pools

LitecoinPool.org stratum+tcp://mine.litecoinpool.org:3333 1% PPLNS
ViaBTC stratum+tcp://ltc.viabtc.com:3333 2% PPLNS
F2Pool stratum+tcp://ltc.f2pool.com:3333 2% FPPS

Bitmain Antminer L9 vs. Other Litecoin Miners

Sorted by efficiency. Daily profit calculated at $0.07/kWh.

Hardware Hashrate Power Efficiency Daily Profit Approx. Price
This page
Bitmain Antminer L9 		16 GH/s 3,360 W 210 J/GH $-3.70 $3,800

Run the Live Litecoin Calculator

This simulation uses cached data updated every 10 minutes. The interactive calculator lets you adjust hashrate, electricity cost, and pool fee in real time.

Open Litecoin Mining Calculator

Frequently Asked Questions

Is the Bitmain Antminer L9 profitable for Litecoin mining in 2026?
At $0.07/kWh, the Bitmain Antminer L9 generates approximately $-3.70 per day mining Litecoin at current prices ($44.00/coin). The break-even electricity rate is $0.024/kWh. Profitable operation requires below-average electricity costs. Use our live Litecoin calculator for updated estimates as prices and difficulty change.
What electricity rate does the Bitmain Antminer L9 need to mine Litecoin profitably?
The Bitmain Antminer L9 breaks even on Litecoin mining at exactly $0.0242/kWh at current network conditions. At $4 cents/kWh, the daily profit is $-1.28; at $8 cents/kWh it is $-4.50. See the full profitability table on this page for all five electricity tiers.
What is the ROI timeline for the Bitmain Antminer L9 mining Litecoin?
At a hardware acquisition price of approximately $3,800 and $0.07/kWh electricity, the Bitmain Antminer L9 has an estimated ROI of N/A at current prices — the hardware is not yet cash-flow positive at this electricity rate. ROI calculations assume constant Litecoin price and network difficulty, both of which fluctuate significantly.
How does the Bitmain Antminer L9 compare to other Litecoin miners?
The Bitmain Antminer L9 mines Litecoin at 16 GH/s with 210 J/GH efficiency. There are 1 compatible hardware models for Litecoin in our database. See the comparison table below for a side-by-side efficiency and profitability breakdown of all compatible miners.

Related Simulations